We can help you to reach your ceiling fan receiver. It is a step that you need to take when you are troubleshooting your remote, and the previous steps for troubleshooting have failed. In this case, you may have to access the receiver of your ceiling fan to have a look at the dip switches, or may have to replace the receiver as well. You can choose a universal ceiling fan receiver and remote kit for this purpose and this replacement should be of similar capacity.
It is necessary to access your receiver when you need to troubleshoot your Hampton Bay ceiling fan. The function of the receiver is to help with the functioning of remote control, is usually found within the canopy of the unit. However, you may have to go through the disassembly of the components of your fan such as the canopy cover.
To begin with, turn off the electric power to the fan from the breaker to make sure you are safe. This step will prevent the risk of electrocuting yourself while dealing with it. by turning off the power, you remove the canopy cover to take a start. This cover conceals the mounting bracket and wiring of the fan and works as a decorative piece. Find the clips or screws which are keeping the canopy in its place, and remove them to access the inside.
After removing the canopy, you can find the receiver. The receiver is usually available within the canopy or attached to a mounting bracket in most ceiling fans by Hampton Bay. It is a rectangular and small box that controls the functions of fan, as it makes a connection between the motor and the house wiring and any remote control devices.
There will be wires connection which are linked to the receiver available within the canopy. These wires have the ability to connect the receiver, fan’s motor and house wiring and a light kit if your unit has one. if you are replacing or troubleshooting your receiver, make sure that your fan model and remote control are compatible with it before you start.
After checking the receiver, assemble the fan again by following the steps in backward direction. Secure all the connections and part properly before you turn on the power. Prefer your safety as recommended by the instructions and get help from a qualified electrician if you are not confident or cannot handle the electric parts.